Raytools XC3000S Series, Commissioning Manual, Page: 127 / 138

XC3000S Series Laser Cutting
S
y
stem Commissioning Manual
92
7.6.12 Physical button
Physical button
Parameter Name Default Value Remarks
Start signal logic DI14
NO
Settable start signal input pins
NO: No signal output in untriggered, select this item.
NC
：
signal output in untriggered, select this item.
Pause signal logic DI17
NO
Settable pause signal input pins
NO: No signal output in untriggered, select this item.
NC
：
signal output in untriggered, select this item.
Reset signal logic Not use
NO Settable reset signal input pins
NO: No signal output in untriggered, select this item.
NC
：
signal output in untriggered, select this item.
Emergency stop alarm logic DI13
NO
Settable emergency stopping alarm signal input pins
NO: No signal output in untriggered, select this item.
NC
：
signal output in untriggered, select this item.
Red light DO13 Red light of tricolor lamp
Yellow light DO14 Yellow light of tricolor lamp
Green light DO15 Green light of tricolor lamp