Raytools XC3000S Series, Commissioning Manual, Page: 119 / 138

XC3000S Series Laser Cutting
S
y
stem Commissioning Manual
92
7.6.5 Verticality correction
Verticality correction parameters
ParameterName DefaultValue Remarks
Start verticality
correcting Unchecked Turn on and off the
verticality correction
function
Length AB 100mm Verticality correction function tests the length of
one side of a cut rectangle
Length AC 100mm Perpendicularity correction function tests the
lengthof the otherside of the cut rectangle
LengthL1 141.4mm The length of one diagonal of the actual cut
rectangle,which needs to be measured.
After that,fill in that length here
LengthL2 141.4mm Thelength of the other diagonalof the rectangle
after the actual cutting, which needs tobe measured.
After measuring, fill in that length here
7.6.6 Laser head
Laser head
Parameter Name Default Value Remarks
Brand RAYTOOLS Select the
cutting head
brand
Model BT210/240 Select the cutting head model
Focus control mode Manual Focusing Choose according to the type of
focus supported by the cutting