Operator Unit 130-626.NG002
Standard 22 GYRO COMPASS
1-10
1.4.2.1
Auto Heading
In case of a failure of the selected heading an automatic switch-over to the next heading
sensor can be selected. Gyro, GPS THD or magnetic compass can be selected.
Figure 1-6
Auto Heading
Pos. No.
Designation
Function
1
Selection possible
Appears on the display whenever a selection is
possible.
Use select buttons (Figure 1-2/1 and 2) to navigate
through the display.
2
Remaining Time
Shows the remaining time until it switches back to
the overview page.
3
Back
Switches back to the previous page.
4
Set Value
Confirm the settings for auto heading.
5
Gyro Selection*
Decide if an automatic switch-over to the gyro
compass / GPS THD compass(es) is desired.
6
TMC Selection*
Decide if an automatic switch-over to the magnetic
compass is desired.
7
Set
Use the Set button to confirm the selection.
* Only the connected sensors are shown on the display and can be selected for an
automatic switch-over.
The switchover occurs in a pre-defined order:
Gyro
→
Gyro
→ GPS
THD
→ Magnet
