Operator Unit 130-626.NG002
Standard 22 GYRO COMPASS
2-6
2.4
Adjust Brightness
The operator unit can be centrally dimmed (depending on the configuration – see
configuration tool AS, only available to service technicians).
1.
Press the Brightness button (Figure 2-3/9).
- The brightness increases as long as the button is pressed.
2.
Press the Brightness button again to decrease.
- The brightness decreases as long as the button is pressed.
The first operation of the button always increases the brightness.
2.5
Switchover between Day Mode and Night Mode
The display colours can be changed. It can be switched between day mode and night
mode.
A switchover from day mode to night mode is not possible:
•
if the alert page is displayed
•
if the Set LED flashes
To perform a switchover, press the 2 buttons within 3 seconds.
1.
Press the Set button (Figure 2-3/11).
2.
Press the Brightness button (Figure 2-3/9).
- The display colour changes.
