1-15
1.4.2.4
Speed Source DU
The source of the speed and the type of speed – necessary for the speed error
correction – can be selected in this sub-menu.
Puls-Log is selected by default.
CAUTION
This function cannot be adjusted in DV-Bus operation, because the
speed sensor is not connected to the distribution unit (display
information by selecting this menu is “Not accepted”).
The same happens if no external speed sensor is connected.
Figure 1-9
Speed Source DU
Table 1-1
Speed Source DU
Display
Description
Puls-Log
VHW
Water speed and heading
VTG
Course over ground and ground speed
VBW Wtr
Water speed
VBW Gnd
Ground speed
selected
Connected and selected
available
Connected but not selected
not available
Possible but currently not connected
For changing the speed source, see chapter 2.9.4.
