Raytheon Anschütz Pilotstar D, Manual

Page: 51 / 166

PILOTSTAR D
Autopilot
2--9
Edition: March 13, 2009
3060.DOC012
2.2.5 Switching on the Autopilot (Standard Equipment)

The autopilot is activated via the steering mode selector, switch position
AUTO .
The operating mode HEADING CONTROL is now active
(see Chapter 2.2.6).
Change--over to another operating mode is now possible.

The LED panel of the key lights up (GREEN).

The LCD display indication is as follows:
PORT STBD
SET COURSE
OFF TRK
OFF CRS
PARAM
VARI.
LIMITS
YAWING
RUDDER
CNTRUD
SPEED
GYRO
10 20 30
STANDBY
Limit adjustment for the
OFF HEADING
monitoring limits
Set heading deviation
Limit adjustment for
the rudder limitation
Rudder angle indicator Text line
The autopilot system is active; the OFF CRS (off heading) bar graph indication indicates
the set heading deviation via the centric dynamic bar graph segment.
The monitoring limits are shown as static bar graph segments.
With switching on/changing over, the HEADING is taken over as SET HEADING prese-
lection as a matter of principle.
(Adjusting the monitoring limit for OFF HEADING, see Chapter 2.3.3.
Adjusting the rudder limitation, see Chapter 2.3.4.
Synchronization, see Chapter 2.3.6.)
Auto
On/Off
HAND AUTO