Raytheon Anschütz Pilotstar D, Manual

Page: 114 / 166

PILOTSTAR D
4--10
3060.DOC012
Edition: March 13, 2009
8. Heading sensor selection.
If the PILOTSTAR D is equipped with a gyro compass input, go to step
#9 .
If the Pilotstar D uses Magnetic Compass only, use the
Yaw
key to scroll to
”COMPASS” and select ”MAGNETIC” using the key.
9. Using the
Rud
key, scroll down to ”CONFIG.off”. Open the configuration menu by
using the key to select ”CONFIG.on”.
10. Use the
Rud
key to scroll down through the parameters. Use the key to
increase and key to decrease the parameters.
Following are descriptions of the adjustments to be made (see also chapter
”Parameter Information” at the beginning of the description).
XTE TRIM: Adjustment to be made during sea trial in special cases.
Leave at default value.
SPECI SL: Setting the ship’s lengths that do not fit exactly into the
ship’s lengths diagram (S_LENGTH)
RELAY ALARMS: Tiller/Alarm
in conjunction with a Central Alarm System.
Default Tiller:
RELAY Tiller Relay switches ON if Tiller Steering is active.
RELAY Alarm in conjunction with a Central Alarm System.
AUTO FAIL relay active during alarm situation
FIX TURN: Switching on or off the automatic SET HEADING
presetting.