Raytheon Anschütz Pilotstar D, Manual

Page: 65 / 166

PILOTSTAR D
Autopilot
2--23
Edition: March 13, 2009
3060.DOC012
Switching back to another operating mode may bring
about an unintended reaction of the ship!
For this reason, the manual rudder presetting should
be reset to 0

step by step.
Only then, change--over to the intended operating
mode is to be made.
ATTENTION

The display indication is as follows:
PORT STBD
SET COURSE
OFF TRK
OFF CRS
PARAM
VARI.
LIMITS
TRM YAW
TRM RUD
TRM CNT
SPEED
GYRO
10 20 30
STANDBY
Set heading/actual heading
deviation (see section 2.2.6.1)
Rudder blade symbol
TRM RUDDER -- 3
Manual trim rudder adjustment
Limit adjustment for
the OFF HEADING
monitoring
Change of parameter values,
2nd set of parameters
A new SET HEADING, dependent on the preset 2nd set of trim parameters,
initiates the heading change manoeuvre immediately.
The trim rudder order is indicated in the text line as TRM RUDDER ....
in ”

” . The sign describes the rudder position, ”--” for PORT and ”no sign” for
STBD.
The rudder angle indicator indicates the rudder order.
The rudder limitation is faded out.
The heading change manoeuvre is terminated as soon as the HEADING indication
corresponds to the SET HEADING indication.
The OFF HEADING monitoring is active.
The graph bar is in the centre range of the permissible heading monitoring limits.