Although the measurement is finished, the timer
continues to operate. This allows further
measurements on other windings of the same
transformer.
The timer can be halted, at any time, by
pressing the Timer button.
7.2.3 Analysing the HRT Results
Select the measurement results you would like to analyse.
Analyses of the recorded data is slightly different if Profiles mode has been used or not. If Profile
mode has been used, See chapter 6.3.13 For more information. If Profiles are not being used, see
chapter 6.3.12.
Profiles:
From the main screen select
- Profiles
- the transformer
- Info
- the measurement number
- Result
- the measurement date
- Diagram
No Profiles:
From the main screen select
- Results
- the measurement date
- Diagram
Displayed on the screen are the selected results
shown graphically.
If you have the Heat Run Test Software license,
the Button "Analysis" is visible and can be
selected for the calculation.
Instruction Manual Winding Resistance Meter
Type WR100 / WR50 / WR14
Page 83 of 139
