Select 'Info' for more information about the
transformer.
This is the location where additional information
about the transformer can be added.
6.3.13.2 Load Transformer Profile from Archive
When preparing to test a transformer check to see if its Profile is already stored internally in the
instrument or on a USB (key) memory stick. “Use Profiles” must be selected in the General Tab
under Setup. The USB key tab will only be shown if a USB key is inserted in the instrument.
Touch the tap (Intern or USB Key) and select
the transformer you would like to load.
The blue tinted Profile is the active Transformer.
Instruction Manual Winding Resistance Meter
Type WR100 / WR50 / WR14
Page 75 of 139
