6.3.13.1 Create a new Profile
Press new on the tab "Active". A message appears asking if you want to create a completely new
transformer Profile or just make a new measurement under the Active Profile.
Select "New Transformer"
First select the configuration of the Primary winding of the transformer. Choose the corresponding
configuration of your transformer Primary side from the Setup menu shown below. After selection,
the instrument will display the Primary configuration in the highlighted box and automatically move
to the next highlighted box to select the Secondary winding of the transformer.
Instruction Manual Winding Resistance Meter
Type WR100 / WR50 / WR14
Page 72 of 139
Winding configurations set here
Choose from here
