Raymarine ST4000 Plus, Owner'S Handbook Manual

Page: 88 / 119

Chapter 6: Installation
75
Dimension G Pedestal Socket Part No.
Length L
38 mm (1.50 in) Standard dimension
76 mm (3.00 in) 38 mm (1.50 in) D026
89 mm (3.50 in) 50 mm (2.00 in) D027
102 mm (4.00 in) 64 mm (2.50 in) D028
114 mm (4.50 in) 76 mm (3.00 in) D029
127 mm (5.00 in) 89 mm (3.50 in) D030
Tiller pins
For certain non-standard installations a range of tiller pins is available.
Description Size Part No.
Small threaded tiller pin 25 mm (1.00 in) D014
Extra length tiller pin 72 mm (2.80 in) D020
Extra length threaded tiller pin 72 mm (2.80 in) D021
Cabling and socket installation
ï The actuator is connected to the control head using a water proof
plug and socket.
ï The plug comes ready assembled to the actuator.
ï The socket should be mounted in the cockpit next to the actuator.
Cabling
Using the following table as a guide, route a cable of a suitable size
from the rear of the socket back to the control head.
Cable length Copper area AWG
Up to 2.5 m (8 ft) 1.0 mm2 18
Up to 4.0 m (13 ft) 1.5 mm2 16
Up to 6.0 m (22 ft) 2.5 mm2 14