Chapter 6: Installation
55
you mount the transducer, the more the vesselís pitch and roll will affect
the compass performance. Recommended mounting positions are
shown in the following diagram.
6ft (1.8m)
4ft (1.2m)
4ft (1.2m)
As an alternative, you can mount a pick off coil (Z110) below a fully
compensated Class A compass or similar.
Cabling
1. Route the fluxgate compass cable back to the control head
2. Connect the five core cable (colour for colour) to the
Compass
terminals.
D3282-1
Summary of Contents for ST4000 Plus
