30
ST60 Tridata Instrument Owner’s Manual
Preventing steering pin movement
Note:
This section does not apply to Volvo steering systems.
If the Raymarine steering pin has excessive vertical free-play after replacing the
original steering pin, use the plastic sleeve to reduce or remove any movement (as
shown below).
Note:
The plastic spacer must be used to lift the pin so it does not foul on the steering sys-
tem. If necessary, you can shorten the sleeve.
Connecting the sensor to a tie-bar
Before fitting the sensor to a tie-bar, consider these points:
• Not all installations will allow you to mount the rudder position sensor
between the drive apertures. In this case, mount the sensor to a steering arm.
D1709-2c
Spacer
Clearance
Spacer
D1727-2
Power steering
Steering
arm (1)
Steering
arm (2)
Rotary rudder
position
sensor
Starboard
engine
81057_6.book Page 30 Tuesday, February 21, 2006 2:21 PM
