52
ST60 Tridata Instrument Owner’s Manual
1. With the SportPilot in Standby mode, press and hold the end of the control
stalk (
NAV
) for 10 seconds – the red
AUTO
and yellow
NAV
lights will begin
to flash alternately.
2. Steer your boat so that it is pointing to magnetic North, (determined using a
compass, GPS or a land reference).
3. Momentarily press either the
-1
or
+1
degree course change keys (located on
the top of the control stalk).
To exit and save changes
To save any changes and exit heading alignment, momentarily press in the end of
the control stalk (
NAV
).
To exit without saving changes
If you wish to exit without saving any changes, turn the control stalk to the first
pilot position (
LO
) and then back to
STANDBY
.
D1403-2
81057_6.book Page 52 Tuesday, February 21, 2006 2:21 PM
