36
ST60 Tridata Instrument Owner’s Manual
4.5 Connecting SeaTalk equipment
You can use the SportPilot’s dedicated SeaTalk port to connect it to SeaTalk
instruments or autopilot control units. The SportPilot can then share SeaTalk data
with the instruments. It can also provide them with power if required.
Raymarine produce a range of SeaTalk cables you can use to connect the
SportPilot to SeaTalk instruments:
• flat moulded plugs are used on recent SeaTalk instruments (e.g. ST30, ST40
and ST60)
• round plugs are used on older SeaTalk instruments (e.g. ST50)
Conversion cables - flat moulded plug to round plug
Extension cables - flat moulded plugs at each end
D5554-1
Part no.
Type
Length
D187
Flat moulded plug to male round plug
0.15 m (6 in)
D188
Flat moulded plug to female round plug
0.3 m (12 in)
Interface cables - flat moulded/round plug to bare ends
Part no.
Type
Length
D229
Flat moulded plug to bare ends
1 m (3 ft 3 in)
D179
Male round plug to bare ends
3 m (9 ft 10 in)
D181
Female round plug to bare ends
3 m (9 ft 10 in)
Part no.
Type
Length
D284
Flat moulded plugs at each end
1 m (3 ft 3 in)
D285
Flat moulded plugs at each end
3 m (9 ft 10 in)
D286
Flat moulded plugs at each end
5 m (16 ft 5 in)
D287
Flat moulded plugs at each end
9 m (29 ft 6 in)
D288
Flat moulded plugs at each end
20 m (65 ft 6 in)
Extension cables - round plugs at each end
Part no.
Type
Length
D124
Male round plug to female round plug
1 m (3 ft 3 in)
D125
Male round plug to female round plug
3 m (9 ft 10 in)
D126
Male round plug to female round plug
6 m (19 ft 8 in)
D154
Male round plug to female round plug
9 m (29 ft 6 in)
81057_6.book Page 36 Tuesday, February 21, 2006 2:21 PM
