Chapter 4: Installing the SportPilot
37
Typical SeaTalk connections
CAUTION:
Protect the power supply for the SeaTalk 12 V (red) line with a 5 A
fuse (or equivalent circuit breaker) fitted as close to the
SportPilot as possible.
Figure 4-9: Connecting SportPilot to ST60 instrument and handheld remote
Figure 4-10:Connecting SportPilot to ST50 instrument and handheld remote
To connect just a remote to the SportPilot, either:
• use an interface cable (D229 – see
page 36
) and a 3-pin SeaTalk socket and
plug (deck connector), or
• use a 3-pin deck connector and the yellow and green cores of the power
cable: a positive (+) connection from the power source to the deck connector
will be required
D1524-2
Extension cable
Interface cable*
SeaTalk
socket
Z101 remote
ST600R remote
or
*If you only need to connect a remote, plug
the interface cable into the SportPilot socket
SportPilot (rear)
SeaTalk unit (rear)
D1523-2
Interface cable*
SeaTalk
socket
Z101 remote
ST600R remote
or
*If you only have a remote, use a flat plugged interface cable
and connect it directly into the SportPilot socket
SportPilot (rear)
ST50 instrument
Extension
cable
Conversion
cable
81057_6.book Page 37 Tuesday, February 21, 2006 2:21 PM
