38
ST60 Tridata Instrument Owner’s Manual
4.6 Installing the SportPilot
Step 1 – Remove the steering wheel
1.
Turn the wheel all the way over to starboard lock.
You MUST do this
so you can tighten the retaining nut at the end of installation (see
page 45
)
without damaging the SportPilot.
2. Remove the steering wheel hub.
3. Holding the steering wheel still, use a suitable socket or the supplied box
spanner to remove the retaining nut and washer.
4. Carefully remove the steering wheel.
5. Remove the original woodruff key.
Retain the woodruff key as you will
need to use it during a later stage of installation.
D1355-2
137.5 mm (5.4 in)
238.5 mm (9.4 in)
100.5 mm (4.0 in)
220 mm (8.7 in)
Woodruff
key
D1363-2
Steering
wheel hub
Retaining
nut
Washer
81057_6.book Page 38 Tuesday, February 21, 2006 2:21 PM
