48
RC435 and RC435i Chartplotters
Placing a Waypoint
Note:
It is not possible to place multiple waypoints at the same position.
➤
To place a new waypoint:
1. From chart mode, press
ENTER
; the primary function bar is displayed
2. Using trackpad left/right, select
WAYPOINTS
.
3. To place a waypoint at the cursor position:
i. Select
PLACE WPT AT CURSOR
. A description of the options avail-
able is displayed.
ii. Place the cursor in the desired position on the chart and press
ENTER
to place the waypoint. The waypoint is added to the way-
point list and named using the next available number.
The waypoint functions remain displayed so that further way-
points can be placed.
Use
EDIT WAYPOINT
to name the waypoint as described in
Editing
Waypoint Details
on
page 52
.
iii.When finished placing waypoints, press
CLEAR
.
4. To place a waypoint at the vessel’s position:
Select
PLACE WPT AT VESSEL
. A new waypoint is placed at the ves-
sel’s current position. If there is no position data available then no
waypoint is placed.
OBJECT
INFO
ARCHIVES
MORE¬
FIND SHIP
ROUTES
WAYPOINTS
MORE¬
D6233-1
PLACE WPT
AT CURSOR
PLACE WPT
AT VESSEL
PLACE WPT
AT POS
WAYPOINT
LIST
D6236-1
PLACE
WAYPOINT
MOVE CURSOR, "ENTER"TO PLACE
WAYPOINT, "CLEAR" TO QUIT
D4670-1