44
RC435 and RC435i Chartplotters
3. Using the trackpad, set the desired offset value. The distance and
bearing of cursor from vessel is displayed in the Status Bar as
BRG
and
RNG
.
4. Press
CLEAR
to reset the value to zero and return to the Chart Set Up
menu.
—
or
—
Press
ENTER
to confirm the selected offset value.You are returned to
the Chart Set Up menu with
POSITION CALIBRATION
set to
ON
. Posi-
tion data is followed by “(c)” to indicate that the calibration offset has
been set.
An offset of 2nm or less is applied to all position data equal to the range
and bearing between the WGS 84 position and the position entered.
Note:
Pressing
ENTER
with a selected offset of more than 2nm gives a
warning message which is cleared on any key press. The Calibration Set
Up mode maintains and the user can either reselect an acceptable offset
or press
CLEAR
to reset the value to zero and return to the Set Up menu.
4.4 GPS Setup
The GPS set up page provides information for the status of the tracked
navigation satellites plus HDOP and satellite Fix Status. It also provides
the ability to select the SD satellite and to reset the GPS system.
➤
To select GPS Set Up:
1. Press the
PAGE
key to display the SET UP functions:
2. Use the trackpad to highlight the
GPS SET UP
function and press
ENTER
to display the
GPS STATUS
screen and soft key.
GPS STATUS
is
displayed.
D4694_1
