56
RC435 and RC435i Chartplotters
•
Use the database list to erase and name existing routes
•
Edit a route by adding, removing and moving waypoints
Note:
The system is limited to 500 unique waypoints yet 20 routes of 50
waypoints as stated above are permissible. This figure is achieved by us-
ing waypoints in more than one route.
➤
To access the route function bar:
1. Press
ENTER
to display the primary function bar.
2. Select
ROUTES
to display the first level functions.
3. Select
MORE
to see more functions.
4. Select
MORE
again to return to the first level functions.
5. Press
CLEAR
twice to return to chart mode.
Creating a New Route
Note:
If there is a current route on screen, it is cleared when
MAKE
ROUTE
is selected. Ensure that this route is saved before continuing. If
following the current route you must
STOP FOLLOW
(see
page 72
)
before
a new route can be created.
Waypoints in a route can be added/removed after it has been created,
either via the
ROUTES
function or via the cursor (see Editing a Route in the
following sections).
OBJECT
INFO
ARCHIVES
MORE¬
FIND SHIP
ROUTES
WAYPOINTS
MORE¬
D6233-1
D4677-1
D4678-1
