background image

36

RC435 and RC435i Chartplotters

Units

This sets the units for distance, speed and depth. This setting will be used 
to display all data. However, the distance units do not affect the chart 
scale, which is always in nautical miles.

Variation

The variation value is the difference between True and Magnetic 
direction data for heading or bearing values. The Magnetic value is 
derived from True by applying the user selected value of variation.

The variation is set in 1° steps to 30° East or West. Press trackpad right to 
move the value eastward, or left to move it westward. The selected value 
is retained when the unit is switched off. The Default value is zero.

Note: 

Variation can only be changed if the 

VARIATION MODE

 is set to 

MANUAL

Variation Mode

This can be set to 

AUTO

 or 

MANUAL

. In 

AUTO

 mode, the RC435/435i 

automatically calculates and sets the magnetic variation. Set this to 

MANUAL

 to enter your own value.

Date Format

Set the preferred date format (

DD/MM/YY

 or 

MM/DD/YY

). The selected 

setting is retained when the unit switched off. The Default is 

DD/MM/YY

.

Time Offset

To display local time, use the trackpad to change from 

UTC

 (Universal 

Time Constant, also known as GMT) to the desired time offset. This can 
be up to ±13 hours, in 1 hour steps. The default is 

UTC

.

Language

Select the language in which information is to be displayed. The selected 
language is used for screen text, labels, menus and options. Chart text, 
provided by the chart card, is not affected.

Summary of Contents for RC435i

































































































































Reviews: