72
RC435 and RC435i Chartplotters
Stop Follow or Stop GoTo
➤
To stop following the route or target point:
1. Either press the
GOTO
key or move the cursor over the target waypoint.
2. Select the
STOP GOTO
or
STOP FOLLOW
function:
The dotted line from the vessel to the target waypoint disappears.
5.5 Changing the Display Mode
Use the
PAGE
key to select the desired display mode. Repeat presses of
the
PAGE
key provide the following display modes:
•
Set Up functions (see
Chapter 4
)
•
Course Deviation Indicator (CDI)
•
Bearing & Distance Indication (BDI)
•
Waypoint data
•
Navigation data
•
Time/Date data
•
Return to Chart display
Note:
Press the
GOTO
key
in any display mode to return to normal Chart
display.
➤
To change the display mode:
1. Press the
PAGE
key to show the
SET UP
functions with
SYSTEM SET UP
highlighted:
2. Repeat Step 1 to cycle through each of the available display modes.
Note:
The Set Up Function Bar remains displayed in each display mode.
To remove the Set Up Function Bar, press
CLEAR
.
D4689 1
STOP
GOTO
RESTART
XTE
D4688_1
STOP
FOLLOW
RESTART
XTE
WAYPOINT
ADVANCE
D4699_1
SYSTEM
SETUP
CHART
SETUP
TRACK
SETUP
GPS
SETUP
