54
RC435 and RC435i Chartplotters
Erasing Waypoints
Note:
A waypoint that is the target waypoint or waypoints that are also
used in any saved route(s) cannot be erased. If an attempt is made to
erase a waypoint that is used in a saved route, the warning “
WAYPOINT IS
USED IN ROUTE(S) AND CANNOT BE ERASED
” is displayed.
➤
To delete a waypoint using the cursor:
1. Place the cursor over the waypoint; see
Selecting a Waypoint
on
page
50
.
2. Select
WAYPOINT OPTIONS
and press
ENTER
to display the Waypoint
function bar.
3. Select
ERASE WAYPOINT
. A warning box appears. Press
ENTER
to
erase or
CLEAR
to retain. If erased, the waypoint list is updated and
the screen is cleared.
➤
To delete a waypoint using the waypoint list:
1. Select the waypoint from the waypoint list as previously described.
The waypoint list function bar is displayed.
2. Use trackpad up/down to move through the list to highlight the
desired waypoint.
3. Select
EDIT WAYPOIN
T and press
ENTER
to display the Edit Waypoint
function bar.
4. Select
ERASE WAYPOINT
. Press
ENTER
to erase the waypoint.
To return to chart mode, press
CLEAR
three times.
Moving Waypoints
Any waypoint, except the target waypoint, can be moved. The Waypoint
function bar and cursor are used to move the selected waypoint, or the
waypoint position can be edited.
Note:
Take care when editing waypoints as it is possible to move way-
points that are used in routes stored in the Route Database List.
➤
To move a waypoint using the cursor:
1. Place the cursor over the waypoint; see
Selecting a Waypoint
on
page
50
.
2. Select
WAYPOINT OPTIONS
and press
ENTER
to display the Edit Way-
point function bar.
3. Select
MOVE WAYPOINT
. The selected (highlighted) function now has
help text appended to it.
