dealer or the Raymarine website (www.raymarine.com) for latest
software versions.
• For further information regarding the camera’s installation
(including connections and mounting), refer to the installation
instructions that accompany the camera.
Thermal camera cables
Cabling requirements for thermal cameras.
Camera to SeaTalk
hs
switch
You will need a SeaTalk
hs
patch cable to connect the camera to the
SeaTalk
hs
switch. The connection is made between the camera
cable tail to the switch via the coupler supplied with the camera.
Patch cables are available in a variety of lengths.
Joystick Control Unit (JCU)
An Ethernet (with power) cable is used to connect the JCU. The JCU
is supplied with a 1.5 m (5 ft) Ethernet cable for this connection, if
you require a different length contact your dealer for suitable cables.
Power over Ethernet (PoE) injector to SeaTalk
hs
switch
A SeaTalk
hs
patch cable is required for connecting the PoE injector
to the SeaTalk
hs
switch. SeaTalk
hs
patch cables are available in a
variety of lengths.
Video cables
Contact your dealer for suitable cables and adaptors.
SeaTalk
hs
patch cables
Cable
Part number
1.5 m (4.9 ft) SeaTalk
hs
patch cable
E06054
5 m (16.4 ft) SeaTalk
hs
patch cable
E06055
10 m (32.8 ft) SeaTalk
hs
patch cable
E06056
Cable
Part number
15 m (49.2 ft) SeaTalk
hs
patch cable
A62136
20 m (65.6 ft) SeaTalk
hs
patch cable
E06057
64
G-Series installation instructions
Summary of Contents for G-Series system
