Raymarine G-Series system, Installation Instruction

Page: 60 / 180

Digital radar cable extension
If required you can use a Raymarine digital radar extension cable.
D 11687-1 D 11687-3
1
2
1. Power and data digital scanner cable extension.
2. Power and data digital scanner cable. For networked systems, a
SeaTalk
hs switch is required between this cable and the system.
For non-networked systems, a crossover coupler is required for
directly connecting the radar scanner. These connections are
NOT shown in the diagram above.
Note: For Digital Open Array radar scanners, the power
connections on the power and data digital cable MUST be
connected to the VCM100 Voltage Converter Module (NOT
shown in the diagram above).
Note: The extension cable connects to the radar scanner.
60 G-Series installation instructions