Raymarine G-Series system, Installation & Commissioning Instructions

Page: 40 / 128

G-Series Installation & Commissioning 40
See also
• For more detailed installation information refer to the separate
users guide supplied with the display.
• Ensure you record connections to the GPM400 on the schemat-
ic diagram. See
Appendix B - Nav Station schematic .
4.5 Keyboard connections
The G-Series Keyboard communicates using the SeaTalk
ng
sys-
tem. It may be connected directly to the backbone (wired) or use a
remote basestation (wireless).
Note: You should have at least one permanently wired keyboard.
In the event that any wireless keyboards are lost, the wired
keyboard can be used to control the system.
Maximum quantity of Keyboards
The G-Series system will support up to 8 keyboards.
Schematic diagram
When connecting a keyboard to the system, record its details on
your system/schematic diagram. You will need this information dur-
ing commissioning. (See
Appendix B for sample diagrams.)
Wired keyboard system
Power cable extension Not supplied You may extend the power cable
if required. See
page 35 .
See Appendix C for other cables and accessories.
Cable Part No Notes
Monitor
Keyboard
D10068-1
SeaTalk
ng
backbone
Sea
Ta
lk
ng
spur
Sea
Ta
lk
ng
spur
GPM 400
9
WXYZ
8
TUV
7
PQRS
4
GHI 5
JKL 6
MNO
ACTIVE
WPTS
MOB
DATA
MENU PAGE
. 0
2
ABC
3
DEF
1
CANCEL STANDBY DODGE PILOT OK
RANGE
OUT
IN
ENTER