Raymarine e7D Installation And Operation Handbook Download Page 45

Page: 45 / 270

Item

Device

Cable color

Port

Input / output

Positive (+) / negative (-)

Refer to instructions
provided with NMEA
device.

Output

Positive

Refer to instructions
provided with NMEA
device.

Output

Negative

Refer to instructions
provided with NMEA
device.

Input

Positive

NMEA device

Refer to instructions
provided with NMEA
device.

Input

Negative

Refer to instructions
provided with NMEA
device.

Output

Positive

NMEA device

Refer to instructions
provided with NMEA
device.

Output

Negative

NMEA 0183 cable

You can extend the NMEA 0183 wires within the supplied power
and data cable.

Data cable extension

The following restrictions apply to any extension to the NMEA 0183
data wires.

Total length (max)

Cable

Up to 5 m

High quality data cable:

• 2 x twisted pair with overall shield.

• 50 to 75 pF/m capacitance core to

core.

Cables and connections

Summary of Contents for e7D















































































































































































































































































Search results

Summary of Contents for e7D

Reviews:

Raymarine e7D, Installation And Operation Handbook, Page: 45 / 270

Search results

Summary of Contents for e7D

Reviews: