Raymarine e7D Installation And Operation Handbook Download Page 250

Page: 250 / 270

25.11 Touchscreen troubleshooting

Problems with the touchscreen and their possible causes and solutions are described here.

This only applies to HybridTouch displays.

Problem

Possible causes

Possible solutions

Touch lock is enabled

Use the Trackpad to turn off the touch lock on the home screen.

Screen is not being operated with bare
fingers, for example gloves are being worn

Bare fingers must make contact with the screen for correct operation.
Alternatively you may use conductive gloves.

Touchscreen requires calibration

Use the setup menus to calibrate the touchscreen.

Touchscreen does not operate as
expected

Saltwater deposits on the screen

Carefully clean and dry the screen in accordance with the instructions
provided.

250

e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127

Summary of Contents for e7D















































































































































































































































































Search results

Summary of Contents for e7D

Reviews:

Raymarine e7D, Installation And Operation Handbook, Page: 250 / 270

Search results

Summary of Contents for e7D

Reviews: