Raymarine e7D Installation And Operation Handbook Download Page 212 | Manualshive

Page: 212 / 270

Raymarine e7D Installation And Operation Handbook Download Page 212

22.1 Remote control connection

You can control the multifunction display wirelessly using a
Raymarine remote control unit.

The remote control uses a Bluetooth wireless connection.

D12163-2

1

3

2

1.

Multifunction display.

2.

Bluetooth connection.

3.

Raymarine Bluetooth remote control (for example, RCU-3).

To use the remote control you must first:

• Enable Bluetooth in the System Settings on the multifunction

display.

• Pair the remote control unit with the multifunction display.

22.2 Pairing the remote and configuring
the UP and DOWN buttons

The remote control unit must be “paired” with the multifunction
display that you want to control. On your multifunction display, with
the homescreen displayed:

1. Select

Set-up

.

2. Select

System Settings

.

3. Select

Connections

.

4. Select

Bluetooth > On

.

5. Select

New Bluetooth Connection

.

A pop-up message will be displayed to confirm that the device
you are connecting to is discoverable.

6. Select

Ok

to confirm.

7. On your

remote control unit

, hold down the UP and DOWN

buttons together for 10 seconds.

8. Select OK to clear the on-screen message.

A list of discovered devices is displayed.

9. Select the remote control unit in the list of devices.

10. When prompted, press the arrow button on your remote that you

wish to be configured as the UP button. The other arrow button
will automatically be configured as the DOWN button.

If the pairing was successful a “Pairing Success” message will
be displayed. If a “Pairing Failure” or “Pairing Timeout” message
is displayed, repeat steps 1 to 9.

212

e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127

«
...
210
211
212
213
214
...
»

Summary of Contents for e7D















































































































































































































































































Reviews:

No comments