Raymarine e7D, Installation And Operation Handbook, Page: 39 / 270

Sonar variant multifunction displays
The table below details which multifunction display variants feature
a built-in sonar DSM and can be connected directly to compatible
sonar transducers.
Sonar variants Non-sonar variants
e7D e7
e97 e95
e127 e125
c97 c95
c127 c125
Minn Kota transducer adaptor cable
Connects a Minn Kota sonar transducer to a compatible Raymarine
multifunction display.
Cable Part number
1 m (3.28 ft) Minn Kota transducer
adaptor cable A62363
Thermal camera connection
You can connect a thermal camera to your multifunction display.
The camera is connected via a Raymarine network switch. If
you want to use the optional Joystick Control Unit (JCU) with the
camera this must also be connected to the network switch. A
composite video connection is required between the camera and
the multifunction display.
2
3
4 5 6
D12260-1
1
8
7
S eaTalk
hs
/ RayNet
SeaTalk
hs
/ RayNet
SeaTalk
hs
/ RayNet
1. Multifunction display.
2. Raymarine network switch.
3. PoE (Power over Ethernet) injector (only required if using the
optional JCU).
4. Joystick Control Unit (JCU), optional.
5. Cable coupler.
6. Thermal camera.
7. Video connection.
Important notes
• You can control the thermal camera using your multifunctional
display. The Joystick Control Unit (JCU) is optional, but can be
used in conjunction with the multifunctional display to control the
thermal camera if required.
• “Dual payload” thermal cameras include 2 independent lenses; 1
for thermal (infrared) and visible light, 1 for thermal (infrared) only.
If you only have 1 display you should only connect the video cable
labelled “VIS / IR” (visible light / infrared) to the display. If you have
2 or more displays you should connect 1 cable to each display.
• You can only view the thermal camera image on the multifunction
display to which the camera is physically connected. If you want
to view the thermal camera image on more than 1 display you
must obtain a suitable third-party video distribution unit.
• For further information regarding the camera’s installation
(including connections and mounting), refer to the installation
instructions that accompany the camera.
Thermal camera cables
Cabling requirements for thermal cameras.
Camera to network switch
A network patch cable is required to connect the camera to the
network switch. The connection is made between the camera
cable tail and the network switch via the coupler (supplied with the
camera). Network patch cables are available in a variety of lengths.
Joystick Control Unit (JCU)
An Ethernet (with power) cable is used to connect the JCU. The JCU
is supplied with a 7.62 m (25 ft) Ethernet cable for this connection. If
you require a different length contact your dealer for suitable cables.
Power over Ethernet (PoE) injector to network switch
A network patch cable is required for connecting the PoE injector
to the network switch. Network patch cables are available in a
variety of lengths.
Video cables
Contact your dealer for suitable cables and adaptors.
Cables and connections 39