Raymarine e7D, Installation And Operation Handbook, Page: 231 / 270

Menu item Description Options
Connection Manager Provides a list of Bluetooth devices in range. When you highlight
a connection in the list and press OK, the following options are
available:
• Unpair / Forget this device — Disconnect the device and
remove it from the connection list. If you unpair a device in
this way you must re-pair the device if you want to connection
it again to the multifunction display.
• Audio Control — If this option is set to On, you can control
the audio for a compatible wireless media player, from the
multifunction display.
• Unpair / Forget this device
• Audio control On / Off.
New Bluetooth Connection Selecting this menu item initiates the Bluetooth pairing process.
This is necessary for connecting a wireless remote control unit
or media player device to the multifunction display.
WiFi Name
Enables you to specify an SSID (WiFi Name) for connecting WiFi
devices using an encrypted connection. If you want to prevent
unauthorized devices from connecting to your display you must
specify the same SSID for both the multifunction display and the
wireless device you want to connect to the display.
WiFi Security You can encrypt the WiFi connection on the multifunction display
to prevent unauthorized devices from accessing the connection.
This menu item enables you to select the type of WPA (WiFi
Protected Access) encryption you want to use. WPA2 provides
stronger security than WPA.
• None
• WPA Only
• WPA 2 Only. (default)
• WPA / WPA2.
WiFi Passphrase Enables you to specify a password for the WiFi connection.
If you want to prevent unauthorized devices from connecting
to your display you must specify the same password for both
the multifunction display and the wireless device you want to
connect to the display.
WiFi Channel By default the multifunction display automatically selects an
available WiFi channel. If you’re experiencing difficulties with
wireless video streaming it may be necessary to manually
specify a WiFi channel for both the multifunction display and the
device you want to stream video to. • 1 (default)
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9
• 10
• 11
Display streaming Display streaming must be enabled before you can stream video
from the multifunction display to an iPad or iPhone. • On
• Off (default)
NMEA Set-up menu
This menu enables you to configure settings for NMEA devices.
Menu item Description Options
Bridge NMEA Heading If set to ON, NMEA heading data will be bridged onto the SeaTalk
data bus, and will be sent to all NMEA-connected devices. If
set to OFF, NMEA heading data will NOT be bridged onto the
SeaTalk bus. An example of a use for this setting is when using
MARPA with an external fast heading sensor, in which case you
should set this option to OFF to ensure that all NMEA-connected
units receive heading data from the external heading sensor. • On
• Off (default)
NMEA Output Settings
Allows you to enable or disable the individual NMEA “sentences”
that are sent by the multifunction display to any devices
connected the NMEA output port. • APB
• BWC
• BWR
• DBT
• DPT
• GGA
• GLL
Customizing your display
231