Raymarine e7D, Installation And Operation Handbook, Page: 100 / 270

Item Description
1 Range — horizontal chart scale indicator (shown in
selected system units).
2 Vessel symbol — your vessel’s current position.
3 Depth Scale — approximate depth beneath your vessel
(optional).
4
Waypoint — (Active)
5 Orientation — states the orientation mode that the chart
is using.
6 Center-of-view — the white cross indicates the center
of chart view at the water level (optional).
7 Cartographic objects — use the Cartography Set-up
menu to choose which objects to display.
8 Rotation — shows in degrees true, how far the
on-screen view has been rotated from your vessel’s
heading and the tilt angle of your vessel.
9 North arrow – 3D indication of True North in relation
to the chart view. The north arrow also tilts to indicate
pitch angle.
Manipulating the 3D chart view
From the chart application:
1. Chart pitch
i. With the chart is in 3D mode, go to the 3D View menu: Menu
> Adjust 3D View .
ii. Select Pitch .
iii. Use the Rotary Control to change the pitch angle of the
chart display.
D 11755-1
2. Rotate
i. With the chart is in 3D mode, go to the 3D View menu: Menu
> Adjust 3D View .
ii. Select Rotate .
iii. Use the Range Control to change the rotation of the chart
display.
D
1
1
7
5
6
-1
3. Adjust Range
i. With the chart is in 3D mode, go to the 3D View menu: Menu
> Adjust 3D View .
ii. Select Adjust Range .
iii. Use the Rotary Control to zoom in and out of the chart,
4. Pan — Use the Joystick at any time to pan the chart.
Panning the chart using touch
This only applies to HybridTouch displays.
In the chart application:
1. Swipe your finger across the display in the direction you want
to pan the chart.
100 e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127