Raymarine e7D, Installation And Operation Handbook, Page: 148 / 270

13.1 AIS overview
The AIS feature enables you to receive information broadcast by
other vessels, and to add these vessels as targets in the chart and
radar applications.
With an optional AIS unit connected to your system you can:
• Display targets for any other AIS-equipped vessels.
• Display voyage information being broadcast by these targets,
such as their position, course, speed and rate-of-turn.
• Display basic or detailed information for each target vessel,
including safety-critical target data.
• Set up a safe zone around your vessel.
• View AIS alarm and safety-related messages.
• Add AIS-equipped friends and regular contacts to a “Buddy List”
AIS information is displayed in the form of an overlay in the chart
and radar applications. Additional data is displayed in a dialog
box, for example:
0 97°T
11.6kt
1.237n m
00h 04m 33s
1
3
2 4 6 7 5
D 12220-1
Item Description
1 Dangerous target (flashes).
2 Safe zone (defined by distance and /
or time).
3 AIS target vessel.
4 Heading.
5 Direction of turn.
6 COG/SOG vector.
7
Safety critical data.
AIS-equipped vessels in the surrounding area are displayed in the
chart or radar application as triangular targets. Up to 100 targets
are displayed. As the vessel’s status changes, the symbol for the
target changes accordingly.
Vectors can be displayed for each target. These vectors indicate
the vessels direction of travel and the distance it will travel over a
specified period of time (COG / SOG vector). Targets displayed
with their vectors are referred to as ‘active targets’ and are scaled
according to the size of the vessel. The larger the vessel, the larger
the target. You can either display all targets or just dangerous
targets.
How AIS Works
AIS uses digital radio signals to broadcast ‘real-time’ information
between vessels and shore-based stations via dedicated VHF radio
frequencies. This information is used to identify and track vessels in
the surrounding area and to provide fast, automatic and accurate
collision avoidance data. The AIS features complement the radar
application, as AIS can operate in radar blind spots and can detect
smaller vessels equipped with AIS.
Note: It may not be mandatory for vessels to be fitted with
operational AIS equipment. Therefore, you should not assume
that your multifunction display will show ALL vessels in your area.
Due prudence and judgement should be exercised. AIS should
be used to complement radar, NOT substitute it.
AIS Simulator Mode
Raymarine recommends that you use the simulator function to
familiarize yourself with the AIS features. When the simulator
function is enabled (
homescreen > Set-up > System Settings >
Simulator ), it displays 20 AIS targets within a 25 nm range. These
targets are displayed using the appropriate AIS target’s status
symbol, and move around the screen as if they were real targets.
Note: Incoming safety messages are NOT displayed while the
simulator is enabled.
148 e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127