Raymarine e7D Installation And Operation Handbook Download Page 246 | Manualshive

Page: 246 / 270

Raymarine e7D Installation And Operation Handbook Download Page 246

25.7 System data troubleshooting

Aspects of the installation can cause problems with the data shared between connected equipment. Such problems, their possible
causes and solutions are described here.

Problem

Possible causes

Possible solutions

Check the data bus (e.g. SeaTalk

ng

) wiring and connections.

Check the overall integrity of the data bus (e.g. SeaTalk

ng

) wiring.

Data is not being received at the display.

If available refer to the reference guide for the data bus. (e.g. SeaTalk

ng

reference manual)

Check the source of the missing data (e.g. ST70 instrument or engine
interface).

Check the power to the SeaTalk bus.

Data source (e.g ST70 instrument or
engine interface) is not operating.

Refer to the manufacturer’s handbook for the equipment in question.

Instrument, engine or other system data is
unavailable at all displays.

Software mismatch between equipment
may prevent communication.

Contact Raymarine technical support.

Check that all required equipment is connected to the network..

Check the status of the Raymarine network Switch.

Network problem

Check that SeaTalk

hs

/ RayNet cables are free from damage.

Instrument or other system data is missing
from some but not all displays.

Software mismatch between equipment
may prevent communication.

Contact Raymarine technical support

246

e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127

«
...
244
245
246
247
248
...
»

Summary of Contents for e7D















































































































































































































































































Reviews:

No comments