Raymarine Axiom Pro 12, Installation Instructions Manual

Page: 309 / 360

Photo & Video recording tab
Settings Description Options
Save files to: Determines the save location for photos and
video recordings.
Note: External SD 1 and USB Media are
available when using the RCR-SDUSB
Accessory.
• SD 1
• External SD 1 USB
Media
ClearCruise tab
Settings Description Options
Highlight detected
objects
Uses proprietary ClearCruise™ technology to
highlight and track objects detected in the water. • On
• Off
Beep on detection
When enabled the MFD will beep when an object
is detected.
• On
• Off
Camera motion tab
Settings Description Options
Camera height
above the
waterline
To ensure correct alignment of the camera for
tracking purposes the height the camera has
been installed at, above the waterline, must be
set. • 0ft to 99ft
Set forward
position Allows you to adjust the Forward position for you
camera
Adjust the camera so that it is point in forward
and select Save to set the forward position. Displays the forward
alignment picture
Man overboard Enables and disables automatic tracking of a
MOB alarm.
The most recent target is tracked. • On
• Off
Dangerous AIS
targets Enables and disables automatic tracking of
Dangerous AIS targets.
The most recent target is tracked. • On
• Off
Dangerous MARPA
targets Enables and disables automatic tracking of
Dangerous Radar targets.
The most recent target is tracked. • On
• Off
Enable scan Enables and disables Surveillance mode.
Surveillance mode pans the camera left to right
continuously to the specified speed • On
• Off
Scan width Determines how far the camera pans from left to
right when in Surveillance mode. • Narrow
• Medium
• Wide
Scan speed Determines the speed at which the camera pans
from left to right when in Surveillance mode. • Slow
• Medium
• Fast
Camera app
143