Raymarine Axiom Pro 12, Installation Instructions Manual

Page: 141 / 360

55
Placing a Waypoint (Sonar, DownVision and
SideVision)
When you observe something of interest in the Sonar app you can
place a waypoint at its location so that you can find the area again.
1. Select and hold on the point of interest onscreen.
The Context menu is displayed and scrolling is paused, temporarily.
2. Select Add Waypoint from the context menu.
The Sonar image will remain paused for approximately 10 seconds
after the Waypoint has been placed.
Placing a waypoint RealVision 3D
To place a waypoint whilst viewing a RealVision 3D channel follow
the steps below.
1. Select and hold a location onscreen.
The Waypoint context menu and Red waypoint marker is displayed:
2. Select Place waypoint to create a waypoint at the marker’s
location, or