Raymarine Axiom Pro 12, Installation Instructions Manual

Page: 270 / 360

Settings Description Options
Background Changes the color used for the app background. List of colors.
View mode In GPS track mode the boat icon will remain
in the same position and bottom structure and
target detail will move in true relation to your
vessel movements.
In Scrolling image mode the sonar pings at a
constant speed and displays a scrolling image
behind the boat icon. • GPS track
• Scrolling image
Transducer tab
Settings Description Options
Transducer
Allows selection of Sonar transducer. List of available
transducers.
Display depth as Determines the position from where depth
readings are taken from. • Below keel
• Below waterline
• Below transducer
Speed transducer Allows selection of Speed transducer. List of available
transducers.
Calibrate speed
Allows you to enter an offset between actual
measured speed and the current speed
displayed by your transducer. Offset value.
Enable
temperature
sensor Enables and disables the selected transducer’s
temperature sensor. • On
• Off
Calibrate temp
Allows you to enter an offset between actual
measured water temperature and the current
temperature displayed by your transducer. Offset value.
Sounder tab
Settings Description Options
Sounder name Allows you to rename your sonar module. Onscreen keyboard.
Ping enable
Enables and disables transducer ping. • On
• Off
Ping rate limit
Allows you to restrict the transducer’s maximum
ping rate to suit current conditions. • 1 to 100
Power mode
Adjusts the transducer’s signal strength. In Auto
the sonar module will automatically determine
the optimal power based on current depth,
speed and bottom signal. In Manual you can
adjust the power to the desired level. • 1 to 100
Ping rate
Hyper ping should be used at speeds of up to
40 knots in shallower waters (6 metres or less).
When the depth reaches 6 metres or above the
ping rate will automatically reduce to normal until
depth conditions are met. • Normal
• Hyper
104