Copyright © 1998 Rayco - All Rights Reserved
Printed in U.S.A.
39
RG 1672 DXH DIESEL SUPER CUTTER
TM
RAYCO
®
M
AINTENANCE
I
NTERVALS
Walk-Around Inspection
1. Inspect cutting boom cylinders and linkage for
damage or excessive wear. Repair if damaged.
2. Inspect and remove any chip or residue buildup
in and around the engine.
3. Inspect and remove any chip or residue buildup
or obstructions to air flow in and around the
hydraulic oil heat exchanger.
4. Inspect hydraulic system for leaks. Inspect the
tank, hoses, tubes, plugs, joints, and fittings.
Correct any leaks.
5. Be sure covers and guards are firmly in place.
Inspect for damage.
6. Inspect tires and rims for damage and inflation.
Maintain inflation indicated on tire. Replace
worn tires.
7. Inspect for loose or missing fasteners. Tighten
or replace.
8. Inspect belts (and Poly Chain occasionally) for
wear. Replace if frayed or cracked.
9. Clean out all chips & debris in the Poly Chain
compartment. Remove the bolt securing the
lower cover and open lower cover to remove all
foreign objects and debris.
After First 200 Miles
Trailer Wheel Brakes
-
Adjust
Detailed directions may be found in the
Trailer
Running Gear - Operation Maintenance Service
manual which was provided with the machine
.
Summary of Contents for SUPER CUTTER RG 1672 DXH DIESEL
Page 4: ......