Raw Thrills Terminator Salvation Setup And Operation Manual Download

Page: 58 / 77

Service Manual

CoinUp® Operation Overview

dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡŽƉǇƌŝŐŚƚΞϮϬ

10 T Asset Acquisition Company, LLC

Page 58

Press the modem to the sticky side of the Velcro® strips.

Ensure that the modem bonds solidly.

10.

In the kit, find the modem extender cable.

11.

Connect the modem cable to a USB port on the PC.

12.

Connect the other end of the modem cable to the cell modem.

13.

(Optional) Install Cell Modem Antenna (see below)

14.

Close the back door.

15.

Plug in power cord.

16.

Turn on AC power.

Install Cell Modem Antenna

A cell modem antenna is optional. However, an antenna will help ensure the best possible connection.

Note that the cable is part of the antenna and these instructions cover mounting the antenna to the

cabinet roof. However, other locations may provide better reception, such as a wall, near a window, etc.

Antenna Location Guidelines

Keep the antenna vertical.

Mount the antenna as high as possible.

Avoid mounting an antenna near power lines.

Avoid areas where people could trip on a cable.

ŽŶ͛ƚƚĞŵƉƚǀĂŶĚĂůƐ͗/ĨƉŽƐƐŝďůĞ͕ŬĞĞƉƚŚĞĂŶƚ

enna out of plain sight.

AMAGE

OSSIBLE

Be extra careful when drilling into the cabinet. Be sure not to drill into cabinet

components. Drill only into empty space.

DHESIVE

Only use Velcro® strips for mounting antenna. Do not use the factory-applied,

permanent adhesive backing. Doing so may damage the antenna and the cabinet when removing the

antenna during a cabinet relocation. The warranty does not cover this sort of damage.

Antenna Installation

Set aside the antenna and the Velcro® strips from the kit.

Turn off AC power.

Unplug power cord.

Open the back door.

In a clear space, center punch the antenna cable hole.

Using a 5/8-inch hole bit, drill the hole for the antenna cable.

Avoid implosion. Read the warning above.

Slide the antenna coaxial cable down the cable hole and into the cabinet.

Remove the protective strip from one side of the Velcro® strips.

Keep the hook and loop Velcro® strips together.

Mount the sticky side of the Velcro® strips to the bottom of the antenna.

You can apply the Velcro® sticky side to the adhesive on the antenna base. Do not let the

Summary of Contents for Terminator Salvation














































































Search results

Summary of Contents for Terminator Salvation

Reviews:

Related manuals for Terminator Salvation

Brands by name

Popular brands

Raw Thrills Terminator Salvation, Setup And Operation Manual

Search results

Summary of Contents for Terminator Salvation

Reviews:

Related manuals for Terminator Salvation

Brands by name

Popular brands