dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡϰϮ͟ĞůƵdžĞ'ĂŵĞ
Page 57
dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡ'ĂŵĞ^ŽĨƚǁĂƌĞŽƉLJƌŝŐŚƚΞϮϬϭϬWůĂLJDĞĐŚĂŶŝdžΡ/ŶĐ͘ůůƌŝŐŚƚƐƌĞƐĞƌǀĞĚ͘
3.
Enter the password.
4.
(Optional) To change login information, use the Profile tab.
5.
Select locations or products to view.
FCC Compliance
You are solely responsible for FCC compliance on installations.
Network Installation
Installation Process Overview
1.
Install the Internet Connection
2.
Install software from game restore DVD, if needed.
3.
Register the game.
D
AMAGE
P
OSSIBLE
Be extra careful when drilling into the cabinet. Be sure not to drill into cabinet
components. Drill only into empty space.
Install Ethernet Cable (option 1)
1.
Set up DSL or cable modem service through an ISP.
2.
Turn off AC power.
3.
Unplug the power cord.
4.
Center punch a hole for the Ethernet cable.
5.
Using a 5/8-inch drill bit, drill a cable hole.
6.
Run the Ethernet cable to the cabinet.
7.
Route the Ethernet cable through the cabinet hole.
8.
Open the back door.
9.
Inside the cabinet, dress the Ethernet cable away from other cables and metallic parts.
10.
Locate the RJ45 Ethernet jack on the back of the PC.
11.
Connect the Ethernet cable to the RJ45 jack on the PC.
12.
Close the back door.
13.
Plug in power cord.
14.
Turn on AC power.
Install Cell Modem (option 2)
1.
Set aside the modem, Velcro® strips and extender cable.
2.
Turn off AC power.
3.
Unplug power cord.
4.
Open the back door.
5.
Remove the adhesive protection from one side of the Velcro® strips.
Keep the Velcro® strips together.
6.
Locate a clear and accessible space for the modem near the PC.
7.
Lift the modem and stick one side of the strips to the shelf beneath the modem location.
8.
Remove the adhesive protection from the free side of the Velcro® strips.
