Raw Thrills Terminator Salvation, Setup And Operation Manual

Page: 14 / 77

Service Manual Setup
dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡŽƉLJƌŝŐŚƚΞϮϬ
10 T Asset Acquisition Company, LLC Page 14
17. You may use one or both guns for this test. Each gun controls a dual-track of colored dots. As
you tilt each gun, the orientation of the tracks rotates as the sensors perceive the change in
angle.
dŚĞƐƚƌĞŶŐƚŚŽĨĞĂĐŚŐƵŶ͛ƐƐŝŐŶĂůŝƐŶŽƚĞĚŝŶĂďĂƌĐŚĂƌƚ͘
Note whether any of the dots disappear or flicker when near the center of the screen. This may
indicate a dirty or poorly functioning camera inside the gun.
18. Press the START button to return to the System Tests menu
19. Squeeze the trigger to highlight the Gun Sensor Test.
20. Press the START button to begin the test.
GUN SENSOR TEST
IR GUN CALIBRATION
„ „ „ „ „ „ „ „ „ „
„ „ „ „ „ „ „ „ „
POINT EITHER GUN AT THE SCREEN AND AIM ALL AROUND TO ACTIVATE ALL THE SENSORS.
ACTIVE SENSORS ARE GREEN. INACTIVE ARE RED.
IF A SENSOR NEVER ACTIVATES, THIS MAY INDICATE A PROBLEM WITH THAT SENSOR.
PRESS START TO EXIT
21. Sweep the gun from left to right and back again and watch the squares on screen to ensure they
all turn green.
If any squares remain red as the gun passes them, that particular IR sensor may be dirty or
damaged.
22. Press the Start button to return to the System Tests menu.