Ravenheat RSF 82E, Installation And Servicing Instructions

Page: 20 / 50

Fig. 398
KEY
63 -Air intake duct extension
56 - Sample point (if required)
64 - Flue Exhaust duct extension
57 - Elbow Header
65 - Pipe centering spring
59 - Rubber seal 0 60
128 - In Line Bend (45” and/or 90”)
USING AN INLINE 135
o
OR 90
o
BEND & VERTICAL FLUE SECTION
VERTICAL FLUE OPTIONS
The vertical flue kit is intended
for use where a horizontal flue
outlet is not possible or
desired. The vertical flue can
be used either with a flat roof
or a pitched roof (maximum
pitch 60”). Where a straight
vertical flue is not possible or
desired, an offset vertical flue
can be used in conjunction
with a side horizontal flue
extension piece and an inline
90” flue bend.
Deducted from overall length for each
90” bend 750 mm
135” bend 375 mm