CHAPTER
3
Introduction: System Overview
7
CHAPTER 3
INTRODUCTION
SYSTEM OVERVIEW
The Raven Sidekick Pro™ ICD (ISO Client Device) Direct Injection system is designed to provide efficient and
accurate application of liquid chemicals from an injection module. By using a separate injection module, the
system eliminates mixing chemicals in the tank, reduces chemical waste, and simplifies equipment care and
maintenance.
Select a high flow injection system to control a wide range of chemical flow rates from 5 - 200 oz./min. Select low
flow injection system to provide chemical flow rates from 1 - 40 oz./min.
TABLE 1.
Injection Modules
By connecting the module to an ISOBUS Universal Terminal and compatible rate controller, including Raven ISO
Product Controller II or Raven RCM (Rate Control Module), multiple injection pumps can be controlled through a
single UT working set.
NOTE:
Priming, calibration, rinsing, and diagnostics options are available from the individual ICD working set.
Refer to the rate controller operation manual for capabilities and user settings.
After proper installation and calibration of the injection system and ISOBUS controller, including a set target rate
for the carrier and injected chemicals, the operator enables the product control system and the control console will
automatically maintain the application rate regardless of vehicle speed or active boom section width.
Performance of the Sidekick Pro™ injection system relies upon proper installation and maintenance of the
complete sprayer system. Please review this manual before installing or operating this system to help ensure
proper setup and follow instructions provided for proper care and maintenance of the injection system.
Description
Module
1-40 Oz./min.
24 Gallon Injection Module
063-0174-771
5-200 Oz./min.
24 Gallon Injection Module
063-0174-772
