CHAPTER 5
32
SideKick Pro™ ICD 1-40 oz./min. and 5-200 oz./min. Installation & Operation Manual
TABLE 1.
Sidekick Pro™ ICD Main Screen Information
SYSTEM SETTINGS
1. Open the UT Menu and select the desired Sidekick Pro™ ICD Menu button.
2. Press the Product Setup button.
3. Select Settings. The following information will display:
Display
Icon
Description
Actual Flow
Displays the actual flow rate of the pump during operation.
Target Flow
Displays the target flow rate of the pump.
Actual Pump State
Shows if the actual state of the pump is ON or OFF.
Pressure
Displays the pressure at the injection pump pressure
transducer.
DI Efficiency
Displays the efficiency value of the pump during operation.
Typical values range from 60-100% and will vary
depending on ambient temperature, product viscosity,
system plumbing, and system pressure.
Current Volume
Displays the volume of product dispensed during field
operation and is resettable by the user.
Motor PWM
Displays the motor Duty Cycle (between 0 to 100%) value
during operation.
Motor Voltage
The voltage for the high current bus circuit. High current
power is provided to system components such as the
motor.
Motor RPM
Displays the Motor RPM of the injection pump during
operation.
Rinse Assist
N/A
Allows the user to toggle the state of the Rinse Assist
feature if equipped. If ON, the pump will ignore target rate
messages and will allow the user to perform rinse cycles. If
OFF, the pump returns to normal operation.
Agitation
Allows the user to toggle the state of the agitator to ON or
OFF if an agitator is equipped.
Sidekick Pro
ICD Menu
Product
Setup
System Settings
