System Maintenance: Returning the Pump for Service or Repair
53
SYSTEM MAINTENANCE
RETURNING THE PUMP FOR SERVICE OR REPAIR
Refer to the following procedure should it be necessary to return the Sidekick Pro ICD injection pump for service
or repairs:
1. Prior to disconnecting the injection pump, drain the chemical tank and rinse with clean water.
2. If pump is operating, refer to the
Returning the Pump for Service or Repair
section on page 53 and run clean
water through the injection pump. If pump is not operational, proceed with the following steps.
3. Remove the inlet and outlet cartridge valves and rinse with clean water.
4. Place cartridges in a plastic envelope for shipping.
5. Run clean water through both the inlet and outlet port on the pump head.
6. Run clean water through the both cartridge ports.
WARNING
Always follow safety labels and instructions
provided by the chemical manufacturer or
supplier. Always wear proper personal protective
equipment when handling or disposing
chemicals.
CAUTION
Injection pumps must be cleaned prior to
shipping for service or repair. Pumps returned
with chemical residue or contamination will not
be accepted or subject to service fees.
12.70 mm
[0.50”]
Gauge Tool
Flow Sensor
LED Light
