SBGuidance Disc I Rev. A I CAN
SBG-Disc CAN-EN-Rev. A
Page 47/
50
3.
Check that the correct working width has
been entered.
4.
Ensure that the disc control steers
accurately with minimal or no deviations
before the distance to the next furrow is
measured.
5.
Adjust the centre of the implement by
half the measured connecting error. The
centre can be adjusted with the the
centre adjustment (
) in
SBGuidance under Settings > Vehicle >
Tuning > tab page Implement).
Figure 38 Adjust the center offset
Summary of Contents for SBGuidance Disc
Page 2: ...Page 2 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
Page 8: ...Page 8 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
Page 36: ...Page 36 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
Page 48: ...Page 48 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
