Raven SBGuidance Disc, Installation Manual

Page: 35 / 50

SBGuidance Disc I Rev. A I CAN
SBG-Disc CAN-EN-Rev. A Page 35/ 50
3.6.2. Disc control
1. Attach the angle sensor bracket to the
mounting plate (
Figure 25
). Turn the
disc leg to the straight forward position
and direct the sensor arm straight to the
rear. Now cut the threaded rod to the
required length.
2. Wrap the sensor lead in protective sleeve
to prevent it from becoming constricted
or damaged.
3.6.3. Wheel control
For wheel steering, the angle sensor should be
mounted to an angle sensor bracket (
Figure 26
and
Figure 27
).
Try to benefit from the entire range (0.5 – 4.5V)
of the sensor.
Figure 26 Angle sensor mounted at wheel steering
Figure 27 Angle sensor mounted at wheel steering
Figure 25 Angle sensor on disc steering