SBGuidance Disc I Rev. A I CAN
SBG-Disc CAN-EN-Rev. A
Page 17/
50
2.2.
Mounting the hydraulic manifold
The manifold is equipped with threaded holes
for mounting purposes. Attach the manifold to
the bracket supplied or directly onto the frame
for the disc legs (
Mount the manifold on the implement. Be sure
that the hydraulic hoses can easily be directed
towards the tractor and the control cylinder.
Ensure that the connectors on the proportional
valve can be connected after fitting the
manifold. Connect the control cylinder to A and
B ports of the manifold.
Load Sense
Connect the pressure line to P, the return line to
T and the sensor line to LS on the manifold. Use
the Power Beyond connections of the tractor.
Ensure that the return on the tractor is
pressureless.
Open Center
Connect the pressure line to P and the return
line to T on the manifold. Use the external spool
valve of the tractor. Be sure that the return on
the tractor is pressureless. Be sure to adjust the
flow from the spoolvalve of the tractor to just
the right amount of flow for the job. Too little
flow will result in poor steering performance.
Too much flow will result in overheating the
hydraulic oil.
Figure 6 Hydraulic manifold mounted
Summary of Contents for SBGuidance Disc
Page 2: ...Page 2 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
Page 8: ...Page 8 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
Page 36: ...Page 36 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
Page 48: ...Page 48 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
