SBGuidance Disc I Rev. A I CAN
SBG-Disc CAN-EN-Rev. A
Page 39/
50
4.2.
Determining the control speeds
All new manifolds are equipped with a
proportional valve.
1.
On the tab page Steering (
) for
proportional steering, select Type Pwm.
Allow the oil from the tractor to warm up
before starting determining the control
rates.
The steering can be checked by clicking
one of the Test buttons on the tab page
Steering and by observing whether any of
the LED lights on the DIN connectors light
up.
Before steering: Check if the surroundings
of the discs are clear.
2.
Check if steering to the left and to the
right corresponds to the actual situation.
Otherwise, check the box “L/R Inverted".
3.
Use the “Test" button to the right of the
control percentages to determine the
maximum control speeds. Start with the
maximum control percentages set to
70% and decrease the values until the
maximum control speed decreases.
Set the maximum control percentages to
achieve that the actual maximum control
speed is reached. Restrict the maximum
Figure 30 Tab Steering
Summary of Contents for SBGuidance Disc
Page 2: ...Page 2 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
Page 8: ...Page 8 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
Page 36: ...Page 36 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
Page 48: ...Page 48 50 I SBG Disc CAN EN Rev A SBGuidance Disc I Rev A I CAN Intentionally left blank ...
